How to Install and Remove Bicycle Pedals: Best Methods 2017

There are several instances in where removing the bike pedals is necessary. For example, you need to do this process if you are a retailer and want to ship the bicycle. Moreover, you can benefit from such skill during pedal replacements and repairs to the bearings.

Regardless of the situation, it is important that you should know how to install and remove bicycle pedals. When it comes to pedals, you should consider that the threads of a pedal is different from its right side and left aside.

Therefore, the right-hand thread of the right pedal works in a counterclockwise direction. In short, you have to install and remove the right side pedal in a counterclockwise motion.

The same concept applies to the left side pedal. However, they should be in a clockwise position.

Fortunately, you don't have to waste your time in figuring which is left and which is right. Most of the bike pedals today have "L" and "R" stamps. These letters are your visible indicators to the sides of your clutch.

Moreover, you should not worry if you notice that the threads are sloping up when you are tightening. It is pretty normal. This means that the right side thread will slope upwards to the right. It should be the opposite for the left side thread.

​Now, we have hundreds of pedals in the market. And most of them promise to bring the best quality with the most affordable price. However, if this is your first time buying a pedal, which one will you choose? To help you make a decision, we have concluded some best pedals in the market here. Click here to read Best Mountain Bike Pedals on the Market or check it out!

How to Install and Remove Bicycle Pedals

Removing the Bicycle Pedals

1. The first thing you need to do is to prepare the bike. You must have a repair stand in where you will mount your bicycle.

2. Next, you must shift the chain into the biggest chainring. Doing this step is necessary. Specifically, it will protect the bike against the cuts from the teeth of the chainring.

3. Start rotating the bike until you can get a position in where you can access the right pedal easily.

4. Meanwhile, you should also try various wrenching positions. You must do this until your crank arm and wrench form a 90-degree angle or lesser. It is important to note that the proper mechanical positioning is vital for bike pedals. After all, you don't want to tighten your pedals over.

5. If you can, you should grab the opposite crank. In this way, you will be able to pull the second lever.

6. Afterward, you must turn the wrench in a counterclockwise motion so that you can remove the right pedal. Or you could also convert the crank so that the right pedal will rotate forward. You should be careful in doing these processes. You must not abrade the skin of the bike.

7. Just continue in turning the wrench in a counterclockwise motion until you can free the pedal from the crank.

8. When the right pedal is free, you should rotate your bike once again until you can easily access the left pedal.

9. Just like in the right pedal, you should position your wrench correctly so that it can have an excellent mechanical advantage.

10. Do not forget to grab the right crank for the second lever.

11. Start turning the pedal wrench in a clockwise position. Do this process until you can remove the pedal from the crank.

Important Notes

Some bicycle models have pedals that don’t use a wrench flat. Usually, the back side of their pedal threads has an 8mm hex fitting. Because of this, you must also use an 8mm hex wrench so that you can remove and install such type of pedal.

Always remember that wrench of these bikes is at their pedal's back side. The turning direction does not differ from standard bikes (counterclockwise and clockwise). However, the "appearances" of the turning are somehow different.

Therefore, you must see the wrench on the pedal's orientation. Specifically, you have to the stand on the right side of the bike so that you can have a clear grasp of the right pedal. The same goes for the left pedal.

Installing the Bicycle Pedals

1. The first step should be identifying the left and right pedals. If the wrench flats or axle have "L" and "R" markings, this should not be a problem. However, if there are no indicators, then you should use the direction of the pedal threads. The side that has a thread that slopes forward to the left is the left pedal. On the other hand, the side that has a thread that slopes forward to the right is the right pedal.

2. Once you are done identifying, you should start greasing the pedals. Take note that you must grease the pedals heavily for good measure.

3. Start threading the right pedal into the crank using your fingers on the wrench flats. You should also use the wrench to fit the pedal snugly.

4. Next, position your wrench on the flats so that you can get an excellent mechanical advantage. Your one hand should hold the wrench while the other should be on the different crank.

5. When installing both sides, do not forget to turn the pedal on the bike backward.

6. Use the opposite arm of the wrench as the second lever to tighten the pedal. You should repeat the process for the left pedal. However, you should tread the pedal into a counterclockwise motion to install it. Typically, the torque of standard pedal threads is around 360 pounds per square inches (PSI). Therefore, you should also exert the same amount of effort to install the pedal of the bike.

Important Notes

If you find difficulty in threading the pedal into the arm, then you can repair it using a tap. For example, 9/16 inch x 20 TPI pedals require a TAP-6 set. Meanwhile, 1/2 inch x 20 TPI pedals will need a TAP-3 set.

The primary purpose of a tap is to realign any damaged threads. However, it cannot revert any metals that have been removed. If there are no threads left in your pedal, you should already consult the help of a professional. Usually, they have a pedal bushing kit to repair such damages.

Conclusion

The process of removing and installing bicycle pedals are very doable. Unless there are damages, you can do these simple procedures by yourself. However, you may still want to consult a professional for further recommendations.

Moreover, it is also essential that you have a good understanding of your pedal bearings. You should know that some pedals are proprietary. Therefore, there are no service tools for these kinds of pedals. You wait until these pedals wear out so that you can have a replacement. If your bike's pedals have adjustable cup bearing system, then you can clean and adjust them.

However, you should still take note that the service tools are still unique for each brand. Did you learn from this article? Do you have other DIY methods of removing and installing bicycle pedals? Share it with us in the comment section down below!

Heather L. Makar
 

My name is Heather Makar, and I’m from Seattle. I’m the main responsible for this little bundle of witty write-ups, a collection of tips, and guides about cycling and bikes.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: